Login | Register

Browse Products
Search part number or description:


KTKP01
Fully programmable PIN lock keypad with adjustable time delay 0.3kg

Keypad features 2 switching outputs available as both N/O and N/C, activated when PIN is entered. Outputs remain activated for a delay between 5 seconds and 10 minutes, variable via an on-board preset. A third switching output is activated with the LCD backlight to enable environment light switching. LCD is available in a range of colours, for a complete list please contact our sales team. The keypad matrix is available in both ABS plastic or backlit die-cast aluminium. The keypad board also provides optional extension for remote keypad matrix. The unit can be supplied as a board only, or in an IP rated ABS case or steel enclosure. The PIN is programmable up to approximately 10,000 times, and can be restored to its factory setting via an on-board jumper if necessary. On-board jumpers can also be used to override/disable the built in sounder and LCD backlight independently. The board is powered from 12v - 24v DC.



Click for printable view PDF spec sheet

DA1
12 Volt Door Monitor Unit 0kg

Housed in a sloping front wall or desk mount ABS box, with sounder ON/OFF keyswitch. The unit uses a closed loop which, when opened, can sound immediately or after a set duration. In alarm state there are a set of clean contacts available. The sounder can be reset via keyswitch, or non-latched and reset by closing the loop.



Click for printable view

DA1/DG
12 Volt Door Monitor Unit 0kg

Housed in a dual gang wall mount ABS box, with sounder ON/OFF keyswitch. The unit uses a closed loop which, when opened, can sound immediately or after a set duration. In alarm state there are a set of clean contacts available. The sounder can be latched and reset via keyswitch, or non-latched and reset by closing the loop.



Click for printable view PDF spec sheet

DA1/DGM
12 Volt Door Access Monitor Unit 0kg

As DA1/DG with mild steel front plate in dual gang mounting box.



Click for printable view

DA1/SB
240 Volt Door Monitor Unit 0kg

Housed in a sloping front wall or desk mount ABS box, with sounder ON/OFF keyswitch. The unit uses a closed loop which, when opened, can sound immediately or after as set duration. In alarm state there are a set of clean contacts available. The sounder can be latched and reset via keyswitch, or non-latched and reset by closing the loop.



Click for printable view