|
|
|
Aux/1A
|
Relay Card
DPDT 1 amp relay card with diode for back EMF protection.
|
|
|
|
Aux/5A
|
Relay Card
5 amp relay card with diode for back EMF protection. Available with 5, 6, 12, 24 or 48 volt coil. Multi-relay card also available.
|
|
|
|
Aux/250
|
Relay Card
DPDT 5 amp 240v AC coil relay, with twin double pole clean outputs.
|
|
|
|
Aux/SAFE
|
Safety relay (EN 50205)
16 amp relay in luminous yellow housing for easy visibilty, with 2-pole changeover contacts, forcibly guided contacts according to EN 50205 type B, high physical separation between adjacent contacts and flux-proof to RTII.
|
|
|
|
Aux/5A 4R/DP
|
Relay Card
Single PCB with 4 x 5 amp DP relays with separate inputs for each coil. Can be 12 or 24v DC coil, or mixed. Input is diode protected, and unit has EMF diode protection. Relay contacts are rated at 240v.
|
|
|
|
PSL/150
|
16 Way Relay Card
16 way 5 amp relay card, with either 12 volt DC or 220 volt AC input. Fitted in 310 x 230 x 75 steel hinged box.
|
|
|
|
PSL/200
|
Multi-switch Relay Panel
12 way 5 amp relay card, with either 12 volt DC or 220 volt AC input. Fitted in 310 x 230 x 75 steel hinged box.
|
|
|
|
Aux/Multi A
|
Relay Card
Standard aux relay layout with up to 10 x 12 or 24 volt DC relays, rated at 1 amp. All relays can be activated separately via applied volts or with open or closed loop circuits.
|
|
|
|
Aux/Multi B
|
Relay Card
Standard aux relay layout with up to 10 x 12 or 24 volt DC relays rated at 5 amp. All relays can be activated separately via applied volts, or with an open or closed loop circuit.
|
|
|
Aux2/TR
Spec Sheet
|
Double Pole 1 amp Relay card
The AUX2/TR is a compact low current, semiconductor driven relay card that will take many inputs, the relay can be energised using a NO trigger, NC trigger, +VE applied, -VE applied. The AUX2/TR is supplied with a double pole relay of either 1 or 5Amps and also in other voltages on request. (To be specified when ordering)
|
|
|
|
Aux2/TR5A
|
Double Pole 5 amp Relay card
two 5 amp clean changeover pairs triggered by either N/O or N/C loop. Also has lamp test output and switched negative output. Available in 6, 12, 24 or 48 volt versions.
|
|
|
