|
|
PSU130
0 kg
Spec Sheet
|
12 Volt 10 Amp DC
Unregulated PSU with independent battery charge circuit, calculated to to run at 13.6v at full load. If full load is not drawn the voltage will be higher. Battery charging is initiated by mains fail, as is a set of clean changeover contacts, which are available for remote signalling. Chassis only.
|
|
|
PSU131
0 kg
Spec Sheet
|
12 Volt 10 Amp DC
Unregulated PSU with independent battery charge circuit, calculated to to run at 13.6v at full load. If full load is not drawn the voltage will be higher. Battery charging is initiated by mains fail, as is a set of clean changeover contacts, which are available for remote signalling. Boxed in 310 x 310 x 110mm mild steel enclosure.
|
|
|
PSU132
0 kg
Spec Sheet
|
24 Volt DC 10 Amp
Unregulated PSU with independent battery charge circuit, calculated to to run at 26v at full load. If full load is not drawn the voltage will be higher. Battery charging is initiated by mains fail, as is a set of clean changeover contacts, which are available for remote signalling. Chassis only.
|
|
|
PSU133
0 kg
Spec Sheet
|
24 Volt DC 10 Amp
Unregulated PSU with independent battery charge circuit, calculated to to run at 26v at full load. If full load is not drawn the voltage will be higher. Battery charging is initiated by mains fail, as is a set of clean changeover contacts, which are available for remote signalling. Boxed in 310 x 310 x 110mm mild steel enclosure.
|
|
|
PSU134
0 kg
Spec Sheet
|
12 Volt 20 Amp DC
Unregulated PSU with independent battery charge circuit, calculated to to run at 13.6v at full load. If full load is not drawn the voltage will be higher. Battery charging is initiated by mains fail, as is a set of clean changeover contacts, which are available for remote signalling. Chassis only.
|
|
|
PSU135
0 kg
Spec Sheet
|
12 Volt 20 Amp DC
Unregulated PSU with independent battery charge circuit, calculated to to run at 13.6v at full load. If full load is not drawn the voltage will be higher. Battery charging is initiated by mains fail, as is a set of clean changeover contacts, which are available for remote signalling. Boxed in 310 x 310 x 110mm mild steel enclosure.
|
|
|
PSU136
0 kg
Spec Sheet
|
24 Volt DC 20 Amp
Unregulated PSU with independent battery charge circuit, calculated to to run at 26v at full load. If full load is not drawn the voltage will be higher. Battery charging is initiated by mains fail, as is a set of clean changeover contacts, which are available for remote signalling. Chassis only.
|
|
|
PSU137
0 kg
Spec Sheet
|
24 Volt DC 20 Amp
Unregulated PSU with independent battery charge circuit, calculated to to run at 26v at full load. If full load is not drawn the voltage will be higher. Battery charging is initiated by mains fail, as is a set of clean changeover contacts, which are available for remote signalling. Boxed in 410 x 410 x 110mm mild steel enclosure.
|
|
|
